4

Slip of the belt:  A firm frictional grip between belt and shaft is essential. But sometimes it becomes insufficient. This may cause some forward motion of the belt without carrying the driven pulley with it. This called as slip of the belt. It is expressed as a percentage.

Effect on velocity ratio: Result of belt slipping is to reduce the velocity ratio of the system.

Types of power transmission chains :

When the driving shaft A is rotated, the flange C (link 1) causes the intermediate piece (link 4) to rotate at the same angle through which the flange has rotated, and it further rotates the flange D (link 3) at the same angle and thus the shaft B rotates. Hence links 1, 3 and 4 have the same angular velocity at every instant. A little consideration will show that there is a sliding motion between the link 4 and each of the other links 1 and 3.

             Comparison between cross belt drive and open belt drive :

Conditions for ‘V’ Belt drive selection :

 1. Great amount of Power to be transmitted,

2. Requirement of the high velocity ratio (maximum 10).

3. Small Centre distance between the shafts

4. Positive drive requirement

5. Compact Space

Slip of belt : The motion of belts and shafts assuming a firm frictional grip between the belts and the shafts. But sometimes, the frictional grip becomes insufficient. This may cause some forward motion of the driver without carrying the belt with it. This may also cause some forward motion of the belt without carrying the driven pulley with it. This is called slip of the belt and is generally expressed as a percentage.

Slip of Belt:- Ans:- When driver pulley rotates firm grip between its surface and the belt. This firm grip between pulley and belt is because of friction and known as frictional grip. If this frictional grip becomes insufficient to transmit the motion of pulley to belt. Then there will be. 1) Forward motion of driver pulley without carrying belt called as slip on driving side.