Que.No | Question/Problem | marks |
---|---|---|
Q 5 a ) |
A cam with 40 mm minimum diameter rotates in clockwise........... |
8 |
Q 5 b ) |
In the toggle mechanism as shown in Fig. (2), D is constrained...... |
8 |
Que.No | Question/Problem | marks |
---|---|---|
Q 5 a ) |
In a slider crank mechanism shown in figure 1................ |
8 |
Q 5 b ) |
Draw the profile of cam operating a roller reciprocating follower .......... |
8 |
Que.No | Question/Problem | marks |
---|---|---|
Q 5 b ) |
Draw profile of cam to raise the valve with S.H.M. through 5cm.......... |
8 |
Q 6 b ) |
PQRS is a four bar chain with link PS fixed.......... |
8 |
Que.No | Question/Problem | marks |
---|---|---|
Q 5 b ) |
Construct a cam profile with knife edge follower having an offset of 10 mm........ |
8 |
Que.No | Question/Problem | marks |
---|---|---|
Q 5 b ) |
Problem : A cam is to give the following motion to a knife edged follower : (i) Outstroke during 60° of cam rotation. (ii) Dwell for the next 30° of cam rotation............................. |
8 |