Explain with neat sketch the working of variable displacement vane pump.

) Explain with neat sketch working of variable displacement vane pump. In a hydraulic system the flow rate of the pump needs to be variable this can be easily achieved by varying the rpm of the electric motor. Other method is displacement of a vane inside the pump and therefore its delivery is proportional to the eccentricity between the rotor axis and cam ring. Changing the geometric position of the ring relative to the rotor center will change the delivery volume as per system need. Main components of the vane pumps are: 1. Hardened cam ring 2. Rotor 3. Vanes 4. Screw for position adjustment 5. Thrust bearing 6. Stop

Working : The rotor containing the vanes is positioned eccentric or off-center with regard to cam ring by means of the adjusting screw hence when the rotor is rotated, in increasing and decreasing volume can be created inside the cylinder bore. If the screw is adjusted slightly so that the eccentricity of the rotor to the cam ring is not sufficient the flow will be less where as with higher eccentricity the delivery volume will be increased with the screw adjustment back completely out the cam ring naturally centers with a rotor and no pumping will be the eccentricity will be zero.