You are here

2

State the function of flywheel in IC engine.

A flywheel controls the speed variations caused by the fluctuation of the engine turning moment during each cycle of operation.

A flywheel used in machines serves as a reservoir, which stores energy during the period when the supply of energy is more than the requirement, and releases it during the period when the requirement of energy is more than the supply.

State any two advantages of V belt drive over flat belt drive.

Advantages -1. The V-belt drive gives compactness due to the small distance between the centres of pulleys.

2. The drive is positive, because the slip between the belt and the pulley groove is negligible.

3. Since the V-belts are made endless and there is no joint trouble, therefore the drive is smooth.

4. It provides longer life of 3 to 5 years.

5. It can be easily installed and removed.

6. The operation of the belt and pulley is quiet.

7. The belts have the ability to cushion the shock when machines are started.

Define slip and creep in the belt.

Slip : When the frictional grip becomes insufficient. This may cause some forward motion of the driver without carrying the belt with it. This may also cause some forward motion of the belt without carrying the driven pulley with it. This is called slip of the belt and is generally expressed as a percentage. Creep : When the belt passes from the slack side to the tight side, a certain portion of the belt extends and it contracts again when the belt passes from the tight side to slack side.

Define - 1. Mechanism 2.Inversion

1. Mechanism : When one of the links of a kinematic chain is fixed, the chain is known as mechanism.

2. Inversion of mechanism The method of obtaining different mechanisms by fixing different links in a kinematic chain, is known as inversion of the mechanism. So we can obtain as many mechanisms as the number of links in a kinematic chain by fixing, in turn, different links in a kinematic chain.

Why is balancing of rotating parts necessary for high speed engines?

The high speed of engines and other machines is a common phenomenon now-a-days. It
is, therefore, very essential that all the rotating and reciprocating parts should be completely
balanced as far as possible. If these parts are not properly balanced, the dynamic forces are set
up. These forces not only increase the loads on bearings and stresses in the various members, but
also produce unpleasant and even dangerous vibrations. The balancing of unbalanced forces is

Write any two disadvantages of chain drive.

Disadvantages of chain drives:
1. Manufacturing cost of chains is relatively high.
2. The chain drive needs accurate mounting and careful maintenance.
3. High velocity fluctuations especially when unduly stretched.
4. Chain operations are noisy as compared to belts.

Pages

Subscribe to RSS - 2