You are here

Draw stress-strain diagram for ductile material stating salient points

Question: 

Draw stress-strain diagram for ductile material stating salient points

Answer: 

Stress-Strain diagram for ductile material stating salient points (1 Mark for diagram, 3 Marks for description)

.

 

Proportional limit (A): The stress is proportional to strain. Beyond point A, the curve slightly deviates from the straight line. It is thus obvious, that Hooke's law holds good up to point A and it is known as Proportional limit.

Elastic limit (B): If the load is increase between point A and B, the body will regain its original shape when load is removed; it means body possesses elasticity up to point B, known as Elastic Limit. Upper yield point (C): If the material is stressed beyond point B, the plastic stage will reach and the material will start yielding known as Upper Yield Point. Lower yield point (D): Further addition of small load drops the stress-strain diagram to point D, as soon as the yielding start, this point ‘D’ is known as Lower yield point. Ultimate stress point (E): After the end of yielding, if the load is increase beyond point ‘D’, there is increase in stresses up to point E and thus maximum value of stresses at point ‘E’ is called as Ultimate Stress point. Breaking Stress point (F): After the specimen has reached the ultimate stress, a neck is formed, which decreases the cross-sectional area of the specimen. The stress corresponding to point F is known as Breaking stress.