What is pressure compensated flow control valve ? Explain with sketch.
In any hydraulic circuit there are slight variations in presence of oil. When pressure changes the rate of flow changes but many circuits requires constant flow regardless of input or output pressure variations in the circuit then the pressure compensated FCV is used. It consists of hollow cylinder shaped poppet at the bottom of which there is a fixed orifice. There is a spring inside a poppet as shown in fig. Pressurized oil entering through the inlet port will apply full force on the bottom of the poppet and will try to compress the spring by shifting the poppet to right the poppet will move to right and will close the outlet port. Then movement of the poppet toward right will stop. Now flow of oil through the orifice will start. Oil will occupy the bore of cylinder this flow of oil will equalize the pressure on both ends of the poppet. The poppet will then balance. During the process of poppet balancing, spring will expand and poppet will move toward left thereby uncovering the outlet port. A balance will automatically be established between quantity of oil through orifice and quantity of oil going out through the outlet port even if the pressure of incoming oil changes, the rebalancing will established automatically and constant flow of oil will come out
