Write any four applications of oil hydraulic systems 1. Earth Moving equipments 2. Broaching machine 3. CNC/VMC/HMC Machines. 4. Hydraulic thread rolling machine 5. Hydraulic press brake. 6. Material handling equipments 7. Hydraulic thread rolling machine 8. Hydraulic cranes
Hoses are flexible connecting tubes or pipes to connect actuators, control valves. Different layers of hose 1) Inner tube 2) Reinforcement 3) Outer protective cover Hoses: are flexible vessels that are constructed of multiple layers of different materials. Fittings for hoses are often not permanent, since the hose itself is often replaced in time due to wear
1. Incompatibility of seal material with operating system 2. Excessive heat 3. Excessive load 4. Excessive clearance 5. Excessive pressure 6. Improper fitting 7. Improper groove geometry 8. Abrasion 9. Wear
To start, stop and change the direction of motion of a Single acting cylinder. (Clamping of Job)
Varying the rate of flow of oil will vary the speed of the actuator. Speed control is possible using meter in circuit, meter out circuit, bleed off circuit or by placing flow control before the DCV. Speed control of bi-directional air motor: Bi-directional air motor rotates in clockwise as well as anti-clockwise direction. The speed of bi-directional motor is controlled as shown in fig. The speed control of motor by using variable two flow control valves having built-in check valve and 4x3 DC valve having zero position or central hold position with Pilot S1 and S2.
