Prob.1. Draw Shear force and Bending moment diagram for loading shown below.
Prob.2.Draw bending moment and shear force diagram of a cantilever beam having AB 4 meters long having its fixed end at A and loaded with a uniformly distributed load of 1 kN/m upto 2 meters from A and with a concentrated load of 2 kN at 1 m from B.
Prob.3.Draw bending moment and shear force diagram of a cantilever beam having AB 4 meters long having its fixed end at A and loaded with a uniformly distributed load of 1 kN/m upto 2 meters from A and with a concentrated load of 2 kN at 1 m from B.
Prob 4. A cantilever beam ABCD is fixed at A and free at D ,such that AB=1 m, BC= 2m, CD= 3.5 m. It carries an udl of 150 kN/m from B and D along with a point load of 500 kN at point C. Draw shear force and bending moment diagram for this beam.
Prob 5. A cantilever 2.4 m long carries point loads of 20 kN and 50 kN at free end and 1.68 m from free end respectively. It also carries uniformly distributed load of 30 kN/m starting from 0.24 m to 1.2 m from free end. Draw SFD and BMD.
Pr 6. Draw shear force and bending moment diagram for a cantilever beam AB of 4 m long having its fixed end at A and loaded with uniformly distributed load of 2 kN/m over entire span and point load of 3 kN acting upward at the free end of cantilever. Find point of contra-flexure if any.
Prob 7. Draw SFD and BMD locating all important features for a cantilever of 6m length and point loads of 15N at the center of the length of cantilever and 10N at the end of cantilever. There is udl of 5 KN/m. between the two point loads .