tom

Comparison of multiplate clutch and Cone clutch:

1.Reciprocating engine, Reciprocating compressor;

2. Whitworth quick return mechanism, Rotary engine,

3.Slotted crank mechanism, Oscillatory engine.

4.Hand pump, pendulum pump.

1.Reciprocating engine, Reciprocating compressor link 1 is fixed

2.Whitworth quick return mechanism, Rotary engine​ link 2 is fixed,

Adverse effect of imbalance of rotating elements:

a) Vibration, noise and discomfort,

b) Machine accuracy get disturbed,

c) Power losses,

d) More maintenance

a) Fluctuation of energy -- The difference of maximum and minimum kinetic energy of flywheel is known as Fluctuation of energy

b) Coefficient of fluctuation of energy -- - It is defined as the ratio of the maximum fluctuation of energy to the work done per cycle. It is denoted by ke = (E1 - E2)/work done per cycle

Effect of centrifugal tension on power transmission:

As the belt passes over the pulley with high velocity, centrifugal force is produced on the belt, which tends to act on the belt. This force tries to move the belt away from the pulley.

This force is given by,

T_C = m x V²

There is no effect of centrifugal tension on power transmitted.

Advantages of chain drive over belt drive 

a) No slip takes place in chain drive as in belt drive there is slip.

b) Occupy less space as compare to belt drive.

c) High transmission efficiency.

d) More power transmission than belts drive.

e) Operated at adverse temperature and atmospheric conditions.

f) Higher velocity ratio. g) Used for both long as well as short distances

Slip --- Slip is defined as insufficient frictional grip between pulley (driver/driven) and belt. Slip is the difference between the linear velocities of pulley (driver/driven) and belt.

Creep ----- Uneven extensions and contractions of the belt when it passes from tight side to slack side. There is relative motion between belt and pulley surface, this phenomenon is called creep of belt.

Advantages of roller follower over knife edge follower a) Roller follower has less wear and tear than knife edge follower. b) Power required for driving the cam is less due to less frictional force between cam and follower.

Different mechanism generated by single slider crank chain mechanism. 

a) Reciprocating engine, Reciprocating compressor

b) Whitworth quick return mechanism, Rotary engine,

c) Slotted crank mechanism, Oscillatory engine

d) Hand pump, pendulum pump or Bull engine

Kinematic link --Each part of a machine, which moves relative to some other part, is known as a ‘kinematic link (or simply link) or element. Example – any one Example of machine element, (e.g. shaft, spindle, gear, crank, belt, pulley, key etc. )